---------------------------------------------------------------------------
RTM 1.8.10.068 October 2th 2006
---------------------------------------------------------------------------
ePower_DMC:
1. After oobe, do windwos update and restart computer, ePower will fail to launch and show exception one time
    How to solve:
    ePower will try to execute WMI method more than one time, and make sure the WMI method is successfully executed.

ePower_UI: 

InstallShield:

---------------------------------------------------------------------------
RTM 1.8.10.067 September 12th 2006
---------------------------------------------------------------------------
ePower_DMC:
1. After removing second battery, UI will still show two battery remaining percentage    
    How to solve:
    ePower will reset battery percentage while updating battery information

2. After oobe, do windwos update and restart computer, ePower will fail to launch and show exception one time
    How to solve:
    ePower will try to connect WMI service more than one time, and make sure the WMI connection is created.

ePower_UI: 

InstallShield:
---------------------------------------------------------------------------
RTM 1.8.10.066 August 10th 2006
---------------------------------------------------------------------------
ePower_DMC:

ePower_UI: 

InstallShield:
1.ePower will register WMI by MOF file while installing and delete it after installation.
   On low end platform, the MOF file sometimes will be deleted while the register procedure is not completed
   
   How to solve:
      Make sure the WMI register procedure is really completed then delete the MOF file	

---------------------------------------------------------------------------
RTM 1.8.10.065 August 2th 2006
---------------------------------------------------------------------------
ePower_DMC:
1.Remove all VGA control (Power-play, Power-mizer) functions

ePower_UI: 
---------------------------------------------------------------------------
RTM 1.8.10.064 May 22th 2006
---------------------------------------------------------------------------
ePower_DMC:
1.ePower will set VGA to "maximum performance state" before entering S3/S4.

2.ePower will save the AC/DC status before entering doze mode or auto dimmer.
  
  This will prevent ePower recovers CPU/LCD settings to wrong power scheme.

3.ePower will detect the MCE/Arcade file name in the task manager in "auto-tune" function.
  
ePower_UI:
1.UI will get the S3/S4 timer info by windows API to prevent error   

InstallShield:

---------------------------------------------------------------------------
RTM 1.8.9.063 May 9th 2006
---------------------------------------------------------------------------

ePower_DMC:
1.While AC change to DC, ePower should report the remaining time to UI until the remaining time is stable enough
  While AC change to DC,ePower will update battery every 3 seconds for 6 times. 

2.The ePower tray icon will show the battery information

3.ePower will not set ATI VGA powerplay while changing CPU speed

ePower_UI:
  
InstallShield:
1.ePower will register WMI by MOF file while installing and delete it after installation.
   On low end platform, the MOF file sometimes will be deleted while the register procedure is not completed
   
   How to solve:
      Make sure the WMI register procedure is really completed then delete the MOF file	
---------------------------------------------------------------------------
RTM 1.8.8.062 April 14th 2006
---------------------------------------------------------------------------

ePower_DMC:
1. Some CPU do not support C4onC3 
    a.AMD
    b.Intel CPU that do not support EIST(speed step)
2. While AC/DC change , ePower will disable doze mode and recover CPU/LCD settings
3. While in Dutch , the ePower should use English language

ePower_UI:
  
InstallShield:

---------------------------------------------------------------------------
RTM 1.8.8.061
---------------------------------------------------------------------------
These is no ePower 1.8.8.061
---------------------------------------------------------------------------
RTM 1.8.8.060
---------------------------------------------------------------------------
These is no ePower 1.8.8.060
---------------------------------------------------------------------------
RTM 1.8.8.059
---------------------------------------------------------------------------
These is no ePower 1.8.8.059
---------------------------------------------------------------------------
RTM 1.8.8.058 March 24th 2006
---------------------------------------------------------------------------

ePower_DMC:
1. While resume from S3/S4 , ePower-DM will update the battery information again
2. support powerplay modification for new ATI graphic card

ePower_UI:
  
InstallShield:

---------------------------------------------------------------------------
RTM 1.8.8.057 January 17th 2006
---------------------------------------------------------------------------

ePower_DMC:
1. Fix the Issue that Multiple ID of LAN on Bondensee will result in malfunction of ePower LAN control(Stella).
2. Modify the device state change sequence while changing power schemes, to speed up the changing process.
   (Bluetooth device move to the last one)
3. Fix the WMI bug while accessing C4onC3 function.

ePower_UI:
1. Force UI to update after resumed from S3, to fix the abnormal power setting issue mentioned by Mark.
2. Make sure blue tooth device state change request is the last one to issue while changing device state.
  
InstallShield:

---------------------------------------------------------------------------
RTM 1.8.7.056 January 6th 2006
---------------------------------------------------------------------------

ePower_DMC:
1. Fix the issue that error in launching ePower while guest account is enabled and switched to.
   (WMI can't be initialized on Guest account)

ePower_UI:
  
InstallShield:

---------------------------------------------------------------------------
RTM 1.8.7.055 December 23th 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Remove battery infor polling thread, DMC will no longer polling battery status, but
   only update battery information while
   (1) AC-DC Change
   (2) Device State Change
   (3) Power Event broadcast by System
2. Change the Enhanced Timer Starting position, make sure it starts after ePower_DM initialized.
   (Try to solve .NET Null Reference Issue)

ePower_UI:
1. Fix the issue that polling ODD state too often.
  
InstallShield:
1. Fix the issue that only English prompt words during installation.

---------------------------------------------------------------------------
RTM 1.8.6.054 December 17th 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Remove the IEEE 1394 device control on Como per Sandy's request.

ePower_UI:
1. No Change
  
InstallShield:
1. No Change

---------------------------------------------------------------------------
RTM 1.8.6.053 December 15th 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Extend the polling frequency from 5 seconds to 60 seconds.

ePower_UI:
1. No Change
  
InstallShield:
1. No Change

---------------------------------------------------------------------------
RTM 1.8.6.052 December 13th 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Add detection to Administrative Access.
2. Add Platform Support Acer Garda2.
3. Fix the issue that switch user will results in abnormal behavior of Auto Dimmer.
4. Fix the issue battery information won't update while removing battery if ePower UI is
   present.

ePower_UI:
1. No Change
  
InstallShield:
1. No Change

---------------------------------------------------------------------------
RTM 1.8.6.051 December 6th 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Disable the auto D-state configuration of Realtek audio chip (there is still pop-up sound
   while resuming from S3, S4)

ePower_UI:
1. No Change
  
InstallShield:
1. No Change

Notes:
---------------------------------------------------------------------------
RTM 1.8.6.050 December 5th 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Fix the Graphic PowerMode support if the support number of mode is > 3.
2. Make direct access to CPU power policy if power scheme changes.
3. Add Multi-Language Help Support.
4. Enable Realtek Audio Auto D-state Configuration.

ePower_UI:
1. No Change
  
InstallShield:
1. No Change

Notes:

---------------------------------------------------------------------------
Beta 1.8.6.049 November 29th 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Fix the bug that rewrite the registry when WM_ENDSESSION

ePower_UI:
1. No Change
  
InstallShield:
1. No Change

Notes:

---------------------------------------------------------------------------
Alpha 1.8.6.048 November 28th 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Add Solution to Mobile Mark 2005 wrt Different Test Scenario
   Wirelss : wireless on
   DVD Playback : 1394 on

ePower_UI:
1. No Change
  
InstallShield:
1. No Change

Notes:

---------------------------------------------------------------------------
Alpha 1.8.6.047 November 23rd 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Disable Realtek Audio Auto D-state Configuration

ePower_UI:
1. No Change
  
InstallShield:
1. Add detection to prerequirement of MS .NET Framework 1.1 installation

Notes:
1. If there's no .NET Framework installed on system while installation of ePower,
   It will popup a message to ask user install .NET Framework first.
2. Silent install will abort installation silently.

---------------------------------------------------------------------------
Alpha 1.8.6.046 November 22th 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Fix the restore of lid setting from load default function.

ePower_UI:
1. Fix the abnormal status change of device control when power scheme changes.
  
InstallShield:
1. No Change

Notes:

---------------------------------------------------------------------------
Alpha 1.8.5.045 November 16th 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Audio auto configuration is ready.

ePower_UI:
1. No Change.
  
InstallShield:
1. No Change

Notes:
---------------------------------------------------------------------------

---------------------------------------------------------------------------
Alpha 1.8.5.043 November 11st 2005
---------------------------------------------------------------------------

ePower_DMC
1. Hide Microsoft Battery Icon
2. Text of Mouse move over tray icon is changed to "Acer ePower Management"
3. Doze mode turns LCD to 0% instead of turn off back light.
4. Remove Smart Advisor
5. Auto Tune for media playing now include Acer Arcade and MCE
6. Add ODD control support
7. Add platform support Grapevine (Compal)

Automatic power state control of audio codec will be ready in next version.

ePower_UI
1. Remove device tooltip
1. Add advanced tab for ODD control
  
InstallShield:
1. No Change

Notes:

---------------------------------------------------------------------------
Alpha 1.8.3.042 November 2nd 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Add platform support Como (quanta)

ePower_UI:
1. Remove the driver loading from UI Launch to fix the slow start of UI.
  
InstallShield:
1. No Change

Notes:


---------------------------------------------------------------------------
Alpha 1.8.2.041 Oct 27th 2005
---------------------------------------------------------------------------

ePower_DMC:
1. Fix the issue that power scheme won't switch when resumed from S3, S4 with AC adapter.

ePower_UI:
1. No Changes.
  
InstallShield:
1. No Change

Notes:

---------------------------------------------------------------------------
1.8.2.040 10/25/2005
---------------------------------------------------------------------------

ePower_DMC:
1. Change the UI Target file name to "Acer ePower Management.exe".
2. Set Smart Advisor to Off on Default.

ePower_UI:
1. Load Default include Smart Advisor.

InstallShield:
1. No Change


---------------------------------------------------------------------------
Debug 0.39 10/24/2005
---------------------------------------------------------------------------

ePower_DMC:
1. Fix the Mobile Mark traping issue on Battery Capacity Alarm.

ePower_UI:
No Changes.

---------------------------------------------------------------------------
Debug 0.38
---------------------------------------------------------------------------

ePower_DMC:
1. Add Smart Advisor Support
2. Add acer platform Bodensee Support
3. Fix Doze mode CPU Speed issue.

ePower_UI:
1. Add Smart Advisor control tab in advanced settings

---------------------------------------------------------------------------
Debug 0.37
---------------------------------------------------------------------------

1. Add MultiLanguage Support
2. Fix the Doze mode issue due to the time unit missmatch.

---------------------------------------------------------------------------
Debug 0.36
---------------------------------------------------------------------------

1. Add AutoTune for entertainment

---------------------------------------------------------------------------
Debug 0.35
---------------------------------------------------------------------------

1. Add Platform Acer Unknow as default acer platform support
2. Add trap to MobileMark 2005

---------------------------------------------------------------------------
Debug 0.34
---------------------------------------------------------------------------

1. Add Platform Ness support
2. Replace the SysHook.dll from debug version to release version to solve the MFC42D.dll missing issue.

---------------------------------------------------------------------------
Debug 0.33
---------------------------------------------------------------------------

1. Add Power option support

---------------------------------------------------------------------------
Debug 0.32
---------------------------------------------------------------------------
1. Add VGA class
2. Add mobile-mark 2002 application data

---------------------------------------------------------------------------
Debug 0.30
---------------------------------------------------------------------------

1. Fix issue of change of power scheme caused by other method. now only ePower could change power scheme.

---------------------------------------------------------------------------
Debug 0.29
---------------------------------------------------------------------------

1. Add multi device instance support + multi Identities support

---------------------------------------------------------------------------
Debug 0.28
---------------------------------------------------------------------------

1. Add multi device instance support

---------------------------------------------------------------------------
Debug 0.27
---------------------------------------------------------------------------

1. Comment out the C4onC3 statements(not ready on Myna2, will be implemented on Napa)

---------------------------------------------------------------------------
Debug 0.26
---------------------------------------------------------------------------

1. Change the Battery Icons

---------------------------------------------------------------------------
Debug 0.25
---------------------------------------------------------------------------

1. Add OS version check and Acer platform check for DMC

---------------------------------------------------------------------------
Debug 0.24
---------------------------------------------------------------------------

1. Fix the WM_CLOSe MESSAGE
2. Fix the issue of Registry mass up cause by UI startup with boot argument

---------------------------------------------------------------------------
Debug 0.23
---------------------------------------------------------------------------

1. Add Enhanced Features : 1.Auto Dimmer 2.Doze Mode

---------------------------------------------------------------------------
Debug 0.22
---------------------------------------------------------------------------

1. Fix the CPU abnormality issue which resumed from S3, S4

---------------------------------------------------------------------------
Debug 0.21
---------------------------------------------------------------------------

1.Add suport to External Button Event, ePower_DMC will receive the Brightness Level change, Wireless Antenna State, 
Bluetooth Antenna State, and notify ePower_UI to change the state.

2. Fix the UI abnormality when focus set on inactive scheme and change device state from DMC.
